Technical data
| X movement max. | 3085 mm |
| Y movement max. | 1650 mm |
| X speed max. | 90 m/min |
| Y speed max. | 60 m/min |
| Max. axis speed simult. | 108 m/min |
| Max. stroke rate | 900 1/min |
| Laser power | 3200 W |
| Max. punching diameter | 76 mm |
| Max. sheet thickness | 8 mm |
| Max. workpiece weight | 230 kg |
| Max. number tools | 18 Stk. |
| Max. punching force | 220 kN |
| Laser type | TLF 3200 |
| Farbe | weiß/blau |
| Gewicht | 24000 kg |
| Platzbedarf Länge | 7850 mm |
| Platzbedarf Breite | 8200 mm |
| Platzbedarf Höhe | 2550 mm |
| Steuerung (Softwarestand) | Siemens Sinumerik 840 D |
Configuration
Standard equipment:
- Work range X-axis 2585mm for combined operation
- Hi-Las high pressure cutting
- Laser-cutting head with 5’’ lens
- Laser-cutting head with 7,5’’ lens
- head quick change device
- Programmable cutting gas/Pressure settings
- Capacitive height regulation Dias III
- Function: ContourLas
- slag detection
- Compact dust extractor
- tank heating
- autom. tool changer with 19 stations (21 - sheet clamps)
- Full rotation of all tools
- NC-controlled, maintenance free 3-phase motor
- Repositioning device
- tool length compensation
- rapid shutdown of hydraulic system
- automatic shutdown mechanism
- chutes for parts 500 x 500 mm
- sensors for both chutes
- 2 good part container
- punching slug suction system
- metal forming possible
- tool spray lubrication
- Programmable stripper
- adaptive stroke length control
- safety light barriers
- online diagnose device
- RJ45 network connection
- 3,5’’ disk drive
- owners manual
- Work range X-axis 2585mm for combined operation
- Hi-Las high pressure cutting
- Laser-cutting head with 5’’ lens
- Laser-cutting head with 7,5’’ lens
- head quick change device
- Programmable cutting gas/Pressure settings
- Capacitive height regulation Dias III
- Function: ContourLas
- slag detection
- Compact dust extractor
- tank heating
- autom. tool changer with 19 stations (21 - sheet clamps)
- Full rotation of all tools
- NC-controlled, maintenance free 3-phase motor
- Repositioning device
- tool length compensation
- rapid shutdown of hydraulic system
- automatic shutdown mechanism
- chutes for parts 500 x 500 mm
- sensors for both chutes
- 2 good part container
- punching slug suction system
- metal forming possible
- tool spray lubrication
- Programmable stripper
- adaptive stroke length control
- safety light barriers
- online diagnose device
- RJ45 network connection
- 3,5’’ disk drive
- owners manual