Dati Tecnici
X movement max. | 2550 mm |
Y movement max. | 1250 mm |
X speed max. | 100 m/min |
Y speed max. | 60 m/min |
Max. axis speed simult. | 116 m/min |
Max. stroke rate | 1200 1/min |
Laser power | 3200 W |
Max. punching diameter | 76 mm |
Max. sheet thickness | 8 mm |
Max. workpiece weight | 280 kg |
Max. number tools | 22 Stk. |
Max. punching force | 220 kN |
Laser type | TruFlow 3200 |
Farbe | weiß/blau |
Gewicht | 24100 kg |
Platzbedarf Länge | 16100 mm |
Platzbedarf Breite | 8400 mm |
Platzbedarf Höhe | 2500 mm |
Steuerung (Softwarestand) | Rexroth IndraMotion MTX |
Configurazione
Standard equipment:
machine
- Stable, easily accessible C-frame
- Mobile ball roller tables
- Linear magazine for tool stations and clamping claws
- 22 tool stations, 3 clamps
- Foot switch for closing the claws
- Flap for stamped parts 500 x 500 mm including sensor
- Chip container
- 2 good parts containers (punching and laser side)
- Initial filling of hydraulic oil
- ContourLine
- FocusLine
- Nitro Line
- FastLine
- Additional Xp and Yp axis
- Express cylinder laser parts
- Quick flap for laser parts 500 x 500 mm including sensor
- Liftable laser cutting support
- Cinder cone detection
TRUMP Lasers
- CO2 laser TruFlow 2700
- Optimized standby mode
- Maintenance-free turbo radial blower
- High frequency excitation
- Laser control TASC
CUTTING HEAD
- Lens cutting head with 170 mm lens
- Universal quick-change device (UTI) with bus connection
- Control Line
PUNCHING HEAD
- Electro-hydraulic punching head
- Hydraulic single tool holder
- 360° rotation
- Programmable hold-down device (active / passive / reposition)
- Tool length compensation
- Spray lubrication stamp
- Punching slug extraction
- Level monitoring of thread forming and tool lubrication
STEERING
- Open control based on Rexroth IndraMotion MTX
- 15" TFT color screen
- Teleservice via Internet
- Automatic switch-off
- Data transfer
- USB interface
- RJ45 network connection
SECURITY
- CE marking
- Multi-beam light barriers
- Quick shutdown hydraulics
- Bulging detection
- Calculation of fill level in the punching console
machine
- Stable, easily accessible C-frame
- Mobile ball roller tables
- Linear magazine for tool stations and clamping claws
- 22 tool stations, 3 clamps
- Foot switch for closing the claws
- Flap for stamped parts 500 x 500 mm including sensor
- Chip container
- 2 good parts containers (punching and laser side)
- Initial filling of hydraulic oil
- ContourLine
- FocusLine
- Nitro Line
- FastLine
- Additional Xp and Yp axis
- Express cylinder laser parts
- Quick flap for laser parts 500 x 500 mm including sensor
- Liftable laser cutting support
- Cinder cone detection
TRUMP Lasers
- CO2 laser TruFlow 2700
- Optimized standby mode
- Maintenance-free turbo radial blower
- High frequency excitation
- Laser control TASC
CUTTING HEAD
- Lens cutting head with 170 mm lens
- Universal quick-change device (UTI) with bus connection
- Control Line
PUNCHING HEAD
- Electro-hydraulic punching head
- Hydraulic single tool holder
- 360° rotation
- Programmable hold-down device (active / passive / reposition)
- Tool length compensation
- Spray lubrication stamp
- Punching slug extraction
- Level monitoring of thread forming and tool lubrication
STEERING
- Open control based on Rexroth IndraMotion MTX
- 15" TFT color screen
- Teleservice via Internet
- Automatic switch-off
- Data transfer
- USB interface
- RJ45 network connection
SECURITY
- CE marking
- Multi-beam light barriers
- Quick shutdown hydraulics
- Bulging detection
- Calculation of fill level in the punching console